If I Uninstall the Usb Xhci Compliante Host Controller How Do I Reinstall It Again
Hi Harsha. I'thou Greg, an installation specialist and 10 year Windows MVP hither to help you.
See fixes that are working here:
https://www.lifewire.com/how-to-ready-lawmaking-x-errors-2623181
I'll give you everything to try so that hopefully something works. I'll also be standing past hither to help with whatsoever steps and keep if necessary to aid yous further until it'south resolved.
1) Update your Chipset and USB drivers from the PC maker's Support Downloads web page for your full model number, HP Serial Number, or Dell Service tag from the sticker on PC.
2) Compare the latest drivers with the ones before long installed in Device Director reached by right clicking the Offset Bill of fare. Make certain you have the latest BIOS, Chipset, Brandish (Video), Audio, USB3, Bluetooth, Network and all other drivers, or else download and install the latest at present.
If this does not provide the needed driver, click to open up it, from Driver tab choose Update Driver, then Automatically. If that fails go back to Update Commuter > Browse > Allow Me Pick and try all previous drivers. If that fails uninstall the commuter and restart to reinstall it.
three) If no newer or this doesn't help, and then get to the USB category in Device Manager, open up each Enhanced, Hub and Host controller, from Commuter tab select Curl dorsum if available, or if non choose Uninstall.
If your keyboard and mouse are USB, first program the power push to event the needed restart after Rolling back or uninstalling the driver. Go to Settings > System > Ability & Sleep > Additional Power Settings > Cull what Power buttons do to choose Shutdown.
4) Become over this checklist to make sure the install is fix upward correctly, optimized for best performance, and any needed repairs go done: http://answers.microsoft.com/en-u.s.a./windows/wiki...
Start with Step iv to plow off Startup freeloaders which can disharmonize and cause issues, and so Step 7 to bank check for infection the almost thorough way, then step 10 to check for damaged System Files, and also Pace xvi to test a new Local Admin account. And then go on with the other steps to go over your install about thoroughly.
5) Run the Hardware Troubleshooter at Settings > Update & Security > Troubleshoot.
vi) Do you know when this started? If this was acquired by Windows Update(s) then y'all can cheque which were installed at Settings>Update & Security>Windows Update nether Installed Updates, then uninstall them from the link there, and hibernate with the Hide Updates tool downloaded from hither: http://download.microsoft.com/download/f/ii/2/f2...
You can also apply System Restore to go before the problem began, then check for Updates with the Hide Update tool and hide them: http://home.bt.com/tech-gadgets/computing/how-t...
If this was caused by a Version Update and then yous can scroll it in Settings>Update & Security>Recovery and and so hide information technology until information technology matures using the Hibernate Updates Tool downloaded from here: http://download.microsoft.com/download/f/2/2/f2...
7) If nothing else helps you can run a Repair Install past installing the Media Cosmos Tool and choosing from it to Upgrade At present. This reinstalls Windows in about an hour while saving your files, apps and most settings, solves many problems while also bringing it up to the latest version 1809 which yous demand anyhow and by the most stable method. http://windows.microsoft.com/en-the states/windows-10/one thousand...
I hope this helps. Feel free to ask back any questions and let us know how it goes. If you'll wait to rate whether my post helped y'all, I will continue working with you until information technology's resolved.
________________________________________________________
Standard Disclaimer: There are links to non-Microsoft websites. The pages announced to be providing accurate, safe information. Watch out for ads on the sites that may advertise products oft classified as a PUP (Potentially Unwanted Products). Thoroughly inquiry any product advertised on the sites before you make up one's mind to download and install it.
_________________ Windows MVP 2010-xx Millions helped via my tutorials and personally in forums for 12 years. At present an Contained Advisor. I practise non quit for those who are polite and cooperative.
three people establish this answer helpful
·
Was this reply helpful?
Hi HarshaMV
1
What is the Make and exact Model No. of your PC - that will be printed on a sticker on the bottom casing . .
2
Open up Device Managing director again
Right click that USB xHCI Compliant Host controller choose Backdrop
On the Details tab of the resulting dialog, set the Belongings Driblet-Down to Hardware ID's
Right click and copy the top line in the resulting list and paste that into your next reply
3
Practise the exact same process for that 'Unknown Device' that is also in your hardware list . . .
___________________________________________________________________ Power to the Developer! MSI GV72 - 17.3", i7-8750H (Hex Core), 32GB DDR4, 4GB GeForce GTX 1050 Ti, 256GB NVMe M2, 2TB HDD
2 people found this reply helpful
·
Was this reply helpful?
Howdy HarshaMV
I'chiliad Wilfredo S an Independent counselor
Endeavor this article, this can assist y'all with your Issue
https://world wide web.repairwin.com/gear up-usb-device-cannot...
Notation: This is a non-Microsoft website. The page appears to be providing accurate, rubber information. Scout out for ads on the site that may advertise products oftentimes classified as a PUP (Potentially Unwanted Products). Thoroughly enquiry any product advertised on the site before you decide to download and install it.
I hope it helps you, have a nice day!!
Wilfredo Soto
one person plant this reply helpful
·
Was this reply helpful?
Hello Dave, thank you for your response.
Here is the Hardware ID you accept asked,
PCI\VEN_8086&DEV_9D2F&SUBSYS_8100103C&REV_21
Was this answer helpful?
Hi Harsha
That device is the Intel USB iii.0 eXtensible Host Controller
Intel don't seem to supply a driver for Windows 10 directly, download the Intel Commuter & Back up Assistant (Intel DSA) and tun that on your PC, it should detect and install that driver for you
https://www.intel.com/content/world wide web/united states of america/en/support...
________________________________________________________
Standard Disclaimer: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Sentinel out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before y'all decide to download and install it.
.
___________________________________________________________________ Power to the Programmer! MSI GV72 - 17.3", i7-8750H (Hex Core), 32GB DDR4, 4GB GeForce GTX 1050 Ti, 256GB NVMe M2, 2TB HDD
2 people found this reply helpful
·
Was this respond helpful?
Hello HarshaThat device is the Intel USB 3.0 eXtensible Host Controller
Intel don't seem to supply a driver for Windows 10 directly, download the Intel Driver & Support Assistant (Intel DSA) and tun that on your PC, it should detect and install that commuter for you
https://www.intel.com/content/www/u.s.a./en/back up...
________________________________________________________
Standard Disclaimer: This is a non-Microsoft website. The folio appears to be providing accurate, condom information. Spotter out for ads on the site that may advertise products frequently classified equally a PUP (Potentially Unwanted Products). Thoroughly research any production advertised on the site earlier yous decide to download and install it..
Hullo Dave,
Even after updating WIndows 10 and Drivers from Intel, the bug is still there!
What should I do next?
two people found this answer helpful
·
Was this respond helpful?
Hi,
Please try these suggestions if USB ports are not working on your organization:
1. Open Device Manager, click Action > Scan for hardware changes.
ii. Restart the computer.
3.Disable and re-enable the USB controller with steps steps:
- OpenDevice Manager, and then expand Universal Serial Jitney controllers.
- Right-click the commencement USB controller nether Universal Serial Bus controllers, then click Uninstall to remove it.
- Repeat previous step for each USB controller that is listed nether Universal Serial Bus controllers.
- Restart the figurer. Later on the calculator starts, Windows will automatically browse for hardware changes and reinstall all the USB controllers that you uninstalled.
- Bank check the USB device to run across whether it is working.
4. Disable Selective Suspend:
- Open up Registry Editor.
- Go toHKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB.
- Create/edit and set DisableSelectiveSuspend to 1.
- Close Registry Editor and reboot.
Notation: Brand sure you create a System Restore point before editing registry.
To resolve fault code 10, you need to update drivers to latest version.
Referenced from https://support.microsoft.com/en-in/help/817900/usb-port-may-stop-working-after-you lot-remove-or-insert-a-usb-device.
Hope this helps!
___________________________________________________________________________________________________ Microsoft MVP (Windows It Pro), since 2022 · Windows Insider MVP · Windows Aid (www.kapilarya.com)
1 person found this reply helpful
·
Was this reply helpful?
Source: https://answers.microsoft.com/en-us/windows/forum/all/windows10-usb-ports-stop-working-getting-usb-xhci/0e949af9-72a2-4e8b-aa6a-7076c08514dc
0 Response to "If I Uninstall the Usb Xhci Compliante Host Controller How Do I Reinstall It Again"
Post a Comment